A4 Quattro Wagon V6-3.2L (BKH) (2005)
Brake Caliper: Service and Repair
Front Brake Caliper FNR-G60, Servicing
Brake caliper, servicing
Note:
^
Install complete repair kit when servicing.
^
Apply thin coat of lithium grease G 052 150 A2 to brake cylinder, piston and seal.
1. Brake carrier
^
Bolt to brake caliper housing
2. Guide pins, 30 Nm
3. Dust cap
^
Insert into bushing
4. Protective cap
^
Push onto bleeder valve
5. Bleed valve, 15 Nm
^
Apply thin coat of lithium grease G 052 150 A2 before screwing in
6. Bearing bushing
^
Insert into brake caliper housing
7. Brake caliper housing
8. Retaining spring
^
Note correct installation position.
^
Engage onto both brake caliper housing studs and onto outer pad retaining spring.
9. Protective seal
^
Do not damage when inserting piston
^
Apply a thin coat of lithium grease G 052 150 A2