A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-1552003.png)
-
Remove ribbed belt from coolant pump.
-
Release tensioner unit
-
Separate connector - 1 - for wiring to air conditioning compressor clutch solenoid.
CAUTION: The air conditioning refrigerant circuit must not be opened.
-
Remove air conditioning compressor from bracket - arrows -.
Note: To prevent damage to the refrigerant lines/hoses, ensure that the lines and hoses are not stretched, kinked or bent.
-
Hang up air conditioning compressor with attached lines on left side of vehicle.
-
Remove bolts - arrows - and remove air conditioning compressor bracket.
-
Remove bolts - arrows - and remove coolant pipe from engine - 2 -.
Note: Ignore - Pos. 1 -.
Installing
Installation is in reverse order of removal. Note the following:
