A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-1411003.png)
Note: Place a rag under oil filter housing to catch escaping engine oil.
-
Disconnect electrical harness connector from Oil Pressure Switch F1 - arrow -.
-
Remove oil pressure switch.
-
Remove bolts - arrows -.
-
Remove oil filter housing.
Installing
Installation is in reverse order of removal. Note the following:
Note: Replace gaskets, seals and O-rings.
-
Add engine oil and check oil level Oil level, checking.
Torque specifications
