A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-1420002.png)
^
See note
^
With oil cooler by-pass valve
15. 9 Nm
16. Drive shaft for oil pump
17. Spring
18. Bracket
19. 9 Nm
20. Chain sprocket for oil pump
^
Can only be placed onto drive shaft in one position
21. 30 Nm plus an additional 90° (1/4 turn)
^
Always replace
^
To loosen, counterhold on sprocket with pin wrench 3212
22. O-ring
^
Always replace
23. O-rings
^
Always replace
24. 20 Nm
25. Oil pump
^
Do not disassemble
^
With cold pressure relief valve 11 bar and pressure regulator valve 4.3 bar
26. 9 Nm
^
Fasten in diagonal sequence in steps
27. Oil pan (lower section)
28. Oil seal
^
Always replace
Oil spray jet for piston cooling
1. Insert bolt (9 Nm) using locking compound
2. Oil spray jet with spray nozzle valve (opening pressure 2 to 2.4 bar positive pressure)
