A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-1447003.png)
-
Poke a hook tool, such as a Snap-on(R) 3ASHA or 3ASH90A (see picture), through rubber coating in centers of Cap A and B and pull caps out of
the cylinder head.
-
Remove Sealing Caps A and B from each borehole.
Bond NEW Sealing Caps Part No:
06B 103 113C in boreholes A and B as follows:
-
Clean surfaces of both boreholes. Borehole surfaces must be free of any oil.
Using Loctite(R) 5910 (Part No: ZAW 269 910)
