A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-1491003.png)
^
The threaded holes - arrows - in the camshafts must face upward.
-
Mount camshaft locating tool T40070 to both cylinder heads and tighten the bolts - arrows - to 20 Nm.
^
The camshaft locating tool T40070 is correctly positioned when the holes for the cylinder head bolts remain free.
-
Remove left and right stabilizer bar mountings - 1 - and - 2 -.
-
Remove sealing plug - arrow - from cylinder block.
CAUTION: Do not turn crankshaft while touching TDC hole with finger - Risk of injury.
