A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Remove bolt - arrow - and remove retainer for connection.
-
Remove bolts - 1 to 8 - and remove right timing chain cover.
Installing
Note:
^
During installation, all cable ties must be re-installed at the same location.
^
Secure all hose connections using hose clamps appropriate for the model type.
CAUTION: Wear safety glasses.
-
Using e.g. a rotating plastic brush, remove sealant residue on covers for timing chain and on cylinder block and head.
CAUTION: Make sure that no sealant residue enters the engine.
-
Clean sealing surfaces; they must be free of oil and grease.
-
Cut tube nozzle at front marking (nozzle diameter approximately 1 mm).