A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Tighten bolts as follows:
-
Insert bolts - arrows - with locking compound and tighten to 5 Nm.
-
Tighten bolts - 1 to 9 - in diagonal sequence to 10 Nm.
-
Tighten bolts - arrows - to 10 Nm.
-
Tighten bolts - 7 -, - 8 - and - 9 - to 22 Nm.
-
Tighten stud bolt - 3 - to 16 Nm.
All:
-
Further installation is in reverse order of removal. Note the following:
-
Install oil filter housing.
-
Install left and right timing chain covers.
-
Install crankshaft seal, timing chain side.
-
Vehicles with manual transmission: Install dual mass flywheel.
-
Vehicles with automatic transmission: Install drive plate.
-
Install transmission.
-
Add engine oil and check oil level.
Torque specifications