A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Remove left front coolant hose in engine compartment - arrows - .
-
Remove coolant hose - arrow - from front coolant line.
NOTE: Place a rag under hydraulic line to catch escaping hydraulic fluid.
-
Remove hydraulic pressure line - arrow - at power steering pump and set it aside on top of longitudinal member.
-
Disconnect electrical harness connector - arrow - at Camshaft Position (CMP) Sensor 4 G301.
-
Free up electrical wiring.
-
Remove bolts - 1 - and - 2 - for heat shield, which are accessible from top.
-
Remove heat shield.