A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-4022001.png)
Discharge Air Temperature Sensor / Switch: Service and Repair
Evaporator Vent Temperature Sensor G263, Removing and Installing
Evaporator Vent Temperature Sensor G263, Removing And Installing
-
Remove glove compartment.
-
Disconnect connector - A -.
-
Turn sensor - B - through 90 degrees and pull it out of air conditioner.
NOTE: The evaporator may ice up if the Evaporator Vent Temperature Sensor G263 is not properly installed in the air conditioner air flow.
