A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-5415001.png)
Temperature Sensor (Gauge): Locations
Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI Engine, Multi-pin Connector Assignments
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Preparations
-
Remove front engine cover - arrows -.
-
Disconnect electrical connection at sensor - 2 -.
NOTE: Disregard - 1 -.
Pin assignment for 2-pin connector on engine coolant temperature sensor G62
1. Ground (GND) ( - )
2. Wiring from sensor to instrument cluster (temperature gauge)
