audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Lighting - DTC 01771/Headlamp Range Control Warning|Page 15929 > < Lighting - DTC 01771/Headlamp Range Control Warning|Page 15927
Page 1
background image

Headlamp Control Module: Customer Interest
Lighting - Headlamp Warning ON/DTC 01771

94 06 01

May 24, 2006

2011041/2

Vehicles Affected

Condition

The adaptive lighting system functions properly otherwise.

Supersedes Technical Bulletin Group 94 number 05-07 dated December 23, 2005 due to updated Service and Warranty procedures. (2011041/1)

^

Headlight range control warning is ON in driver information display. After cycling the ignition, warning symbol is OFF again.

^

A sporadic DTC (01771 -- Control module for vertical headlight aim control system -J431- implausible signal) is set in the Headlight Range Control
Module.

Technical Background

Communication between Headlight Range Control Module and both Headlight Power Output Stages is briefly interrupted.

Production Solution

New Control Module Part No: 4F0 907 357E with updated software 4F0 910 357E is installed. Always check with your Parts Dept. for the latest parts
information.

Service

Check, and if necessary update software of Headlight Range Control Module as follows:

Parts replacement is not permitted replaced parts will be redebited

Update - Programming procedure, checking software level

^

Select Vehicle Self Diagnosis >> 55 - Automatic vertical headlight aim control.

Similar screen appears.

Lighting - DTC 01771/Headlamp Range Control Warning|Page 15929 > < Lighting - DTC 01771/Headlamp Range Control Warning|Page 15927