audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Taillamp/Rear Fog Lamp Bulb, Removing and Installing|Page 16150 > < How to Find Wiring Diagrams|Page 16144
Page 1
background image

Tail Light Bulb: Service and Repair
Taillamp/Rear Fog Lamp Bulb, Removing and Installing

Taillamp/rear Fog Lamp Bulb, Removing And Installing

Removing

-

Turn light switch to position "O".

CAUTION:
-

Switch off all electrical consumers.

-

Switch ignition off and remove ignition key.

-

Unclip plug -1 - from luggage compartment trim - arrow - using a small screwdriver.

-

Remove nut - 1 - and detach retainer bracket.

-

Remove bulb holder - 2 - from housing (press apart retaining tabs - arrows -).

-

Screw bulb out of bulb holder.

Installing

Install in reverse order of removal, noting the following:

-

Insert new bulb in bulb holder.

Tightening torque

Component - fastener

Nm

Retainer bracket to housing - nut

3.5

Taillamp/Rear Fog Lamp Bulb, Removing and Installing|Page 16150 > < How to Find Wiring Diagrams|Page 16144