A4 Quattro Wagon V6-3.2L (BKH) (2005)
Turn Signal Bulb: Service and Repair
Turn Signal/Parking Lamp Bulb, Replacing - Through 10.04
Turn Signal/parking Lamp Bulb, Replacing - Through 10.04
CAUTION:
-
HIGH VOLTAGE!
-
Always disconnect negative (-) battery terminal prior to working on parts of HID headlamp components marked with yellow "HIGH VOLTAGE"
warning symbols.
Removing
-
Remove headlamp.
-
Turn bulb holder - arrow - counter-clockwise and pull it from housing.
-
Pull bulb out of bulb holder.
Installing
Install in reverse order of removal, noting the following:
CAUTION:
-
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the
bulb during operation can cause the glass to cloud over.
-
When installing bulb holder, ensure proper seating. Water intrusion will damage headlamp.
-
Fit new bulb in housing.
-
Install headlamp.