A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-1269003.png)
12 - Countersunk bolts (4x), 80 Nm plus an additional 90° 1/4 turn
^
Always replace
13 - Combi bolt
^
Always replace
^
Tighten to 150 Nm plus an additional 90° 1/4 turn
^
Suspension must be in curb weight position when tightening bolt connections
^
Puller 3- Kukko 15-17
^
Engine/transmission jack V.A.G 1383 A
Removing
-
Removing and installing drive axle
-
Remove securing bolts - 1 - from brake caliper.
-
Remove brake caliper and tie up on body.
-
Remove brake disc.
