audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

9-Position Relay Carrier, Removing and Installing|Page 10360 > < 9-Position Relay Carrier, Removing and Installing|Page 10358
Page 1
background image

Relay Box: Service and Repair
4-Way Relay Carrier In Electronics Box In Plenum Chamber, Removing and Installing

4-way Relay Carrier In Electronics Box In Plenum Chamber, Removing And Installing

Removing

CAUTION:

-

Switch off all electrical consumers.

-

Switch ignition off and remove ignition key.

-

Remove rubber seal of plenum chamber cover in direction of - arrow -.

-

Remove plenum chamber cover - 1 - to front.

-

Use screwdriver to pry off the two caps - 3 -.

-

Loosen nuts - 4 - (do not remove).

-

Remove wiper arms - 2 - from wiper shaft by tilting slightly.

-

Remove nuts completely and remove wiper arms.

-

Pull off retaining clips - 1 - and detach cowl panel grille - 5 -.

-

Remove cover for electronics box in plenum chamber - arrows -.

9-Position Relay Carrier, Removing and Installing|Page 10360 > < 9-Position Relay Carrier, Removing and Installing|Page 10358