audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Engine Controls - Long or Extended Crank At Cold Start|Page 6236 > < Engine Controls - Long or Extended Crank At Cold Start|Page 6233
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine Controls - Long or Extended Crank At Cold Start

01 Long Or Extended Crank At Start

24 09 02 

2018705/3 

March 2, 2009

Supersedes Technical Service Bulletin Group 13 number 08-05 dated November 3, 2008 for reasons listed below.

Vehicle Information

Condition

For vehicles exhibiting all of the following conditions:

-

Extended cranking during initial (cold) engine startup.

-

The engine always starts, but with a longer than normal cranking time (3+ seconds).

-

No DTCs stored.

-

Condition cannot be duplicated with engine warmed up.

-

Vehicle does not exhibit other drivability concerns.

Technical Background

Production Solution

Service

New software in Engine Control Module J623.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

Engine Controls - Long or Extended Crank At Cold Start|Page 6236 > < Engine Controls - Long or Extended Crank At Cold Start|Page 6233