audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Test Chart 1|Page 6742 > < Test Chart 1|Page 6740
Page 3
background image

-

Connect Remote Control V.A.G 1348/3A with adapter cable V.A.G 1348/3-3 with an adapter cable from Connector Test Set V.A.G 1594C at
terminal - 1 -.

-

Cover 2nd connector terminal of adapter cable V.A.G 1348/3-3 with insulating tape to prevent short circuit - arrow -.

-

Route Remote Control V.A.G 1348/3A switch forward in engine compartment.

-

Connect contact - 4 - to vehicle Ground (GND) using a self-made adapter cable.

-

Connect alligator clip to battery "+".

-

Pull rear engine cover off - arrows -.

CAUTION:
-

Fuel system is under high pressure. Before opening high pressure components of the fuel injection system, pressure must be relieved to
residual pressure.

-

Then wrap a clean rag around the connection and relieve residual pressure by carefully loosening the connection.

-

Disconnect fuel line - arrow -.

Test Chart 1|Page 6742 > < Test Chart 1|Page 6740