A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Disconnect electrical harness connector - arrow - at locking flange.
-
Mark fuel return line - 1 - and fuel supply line - 2 -.
CAUTION: Fuel system is under pressure! Before opening system, place clean rags around the connection. Then release pressure by
carefully loosening the connection.
-
Pull both lines from locking flange, by pressing release buttons.
-
Remove bolts - arrows - .
-
Remove Fuel Pump (FP) Control Module J538 between fuel tank and vehicle floor.
Installing
Installation is in reverse order of removal. Note the following: