A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-716003.png)
-
Check the wiring connection for damage, corrosion, lose or broken terminals.
-
If necessary, repair the faulty wiring connection.
If no malfunction is found in the wiring and voltage supply was not OK:
-
Replace the Engine Control Module (ECM) J623.
-
Install the drivers side storage compartment.
Final procedures
After the repair work, the following work steps must be performed in the following sequence:
1. Check the DTC memory.
2. If necessary, erase the DTC memory.
3. If the DTC memory was erased, generate readiness code.
-
End of diagnosis.
