A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Use screwdriver to pry off retaining strap - arrows -.
-
Lay aside engine control module with wires attached.
-
Where applicable, release the retaining clip for the transmission control module.
-
Lay aside transmission control module with wires attached.
-
Release retaining clips - arrows - and lift auxiliary relay carrier out of electronics box.
-
Unclip the fuse carriers at the 4-position relay carrier.
-
Remove relays and control modules and then unclip appropriate relay carrier.
NOTE: Refer to the applicable wiring diagram for exact identification of connections on electronics box Wiring Diagrams
Installing
Install in reverse order of removal.