A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Release trim cover -1 - on upper steering column trim - 2 - using a small screwdriver - arrows A and B
-
Separate upper trim - 2 - from lower trim - 3 - and remove upper trim.
-
Remove release lever for steering column adjustment - 7 - and guide out lower trim.
-
Remove screw - 2 -.
CAUTION: Before disconnecting electrical connections at module, discharge any static electricity by briefly grasping hold of door striker plate
or similar, grounded article on vehicle.
-
Disconnect electrical connections - 1 - and - 3 -.
-
Disconnect electrical connection - 4 -.
-
Disengage connector lock - 1 - in direction of - arrow - in order to release connector - 2 -.
-
Carefully remove steering column switch module.
Installing
Install in reverse order of removal, noting the following:
-
Ensure all fasteners and electrical connectors are properly connected and locked into place.