A4 Quattro Wagon V6-3.2L (BKH) (2005)
Steering Gear: Service and Repair
Replacement
Power steering gear, removing and installing
Special tools, testers and auxiliary items required
Hose clamps up to 25 mm diameter 3094
Steering centering bolt VAS 6224
^
Torque wrench V.A.G 1331
^
Torque wrench V.A.G 1332
^
Open-end ring wrench insert (19 mm and 22 mm; commercially available type)
Removing
-
Remove plenum chamber cover.
-
Disconnect battery and remove if necessary.
CAUTION: Move steering wheel to center position and do not turn it while performing repair work, as otherwise coil connector of airbag module
could be damaged.
-
Remove ignition key with steering wheel in center position.
-
Move steering wheel slightly so that steering lock engages.
-
Remove storage compartment on drivers side.
-
Loosen bolt - arrow -