A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Secure steering column to prevent the two sections from pulling apart, Securing steering column prior to removal.
^
Make sure boot is properly positioned in bulkhead.
-
Clamp off suction and return lines with hose clamps 3094.
-
Remove front wheels.
-
Detach bolt connection between suspension strut and track control link (only on left side of vehicle).
-
Place suspension strut - 1 - in front of track control link - 2 - as seen in direction of travel.
-
Loosen nut - 1 -, remove hex bolt and pull out both upper links - 2 - upward (only on left side of vehicle).
The slots in the wheel bearing housing must not be widened using a chisel or similar.
-
Remove hex bolt - 3 - and remove bolt connection - 4 -.
-
Pull or press tie rod out of steering arm downward.
Note: