A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
From list - 1 - select diagnostic function "08 - Read data block (measured value block)".
Display on VAS 5051 A:
1 - Enter display group
-
Use keypad - 2 - to enter 4 for Display group number 4 and confirm by touching Q key.
Display on VAS 5051 A:
-
Reading for ATF temperature is shown in display zone - 1 -
Checking and correcting ATF level
Note:
^
The ATF level is checked at the ATF inspection plug.
^
The ATF level is correct if a small amount of fluid comes out at the ATF inspection plug when ATF temperature is between 35°C and 45°C, or
50°C in hot climates (the fluid level rises due to expansion as it warms up).
-
Drive vehicle onto a four-column hoist or over an inspection pit so that it is absolutely horizontal.
-
Fill container of ATF charging device V.A.G 1924 with ATF for automatic transmission 09L.
CAUTION: The ATF charging device must be clean and the ATF must not be mixed with other types of ATF!