audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Oil Pan, ATF Strainer and Mechatronics Unit, Removing and Installing|Page 8072 > < Oil Pan, ATF Strainer and Mechatronics Unit, Removing and Installing
Page 1
background image

Fluid Pan: Service and Repair
Oil Pan, Removing and Installing

Oil pan, removing and installing, 09L, 6 Spd. A/T AWD

Special tools, testers and auxiliary items required

Drip tray VAG 1306

Removing

Note:  
^

General repair instructions.

^

Read the rules for cleanliness when working on the automatic transmission.

-

Place drip tray V.A.G 1306 under transmission.

CAUTION:  Wear safety goggles.

-

Remove ATF drain plug - 1 -.

-

Drain ATF.

Note:  
^

Observe relevant disposal regulations.

^

The engine must not be started and vehicle must not be towed without ATF in transmission.

-

Loosen 23 bolts on oil pan in diagonal sequence and remove oil pan.

Installing

Installation is performed in reverse sequence. Note the following:

Note:  
^

Replace seals and gaskets.

^

The drain plug with seal must be replaced.

Oil Pan, ATF Strainer and Mechatronics Unit, Removing and Installing|Page 8072 > < Oil Pan, ATF Strainer and Mechatronics Unit, Removing and Installing