A4 Quattro Wagon V6-3.2L (BKH) (2005)
-
Remove universal support V.A.G 1359/2 from engine/transmission jack V.A.G 1383 A.
-
Place telescopic arm of engine/transmission jack V.A.G 1383 A centrally below cast lug on transmission housing - arrow and support transmission
from below.
-
Remove bolts - 2 - and - 3 - and then subframe securing bolts - 1 - and - 4 -.
-
Slowly lower transmission and subframe using engine/transmission jack V.A.G 1383 A until distance - a - is as specified.
^
Dimension - a - = 50 mm
-
Pry ball socket - 1 - of selector lever cable off selector shaft lever.
-
Remove support bracket from transmission - arrows -.
Note:
^
Shown in illustration with transmission support removed.
^
Do not bend or kink the selector lever cable.