A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-2820001.png)
Shifter A/T: Service and Repair
Selector Mechanism Cover, Removing and Installing
Selector mechanism cover, removing and installing, 09L, 6 Spd. A/T AWD
Removing
-
Remove selector lever handle.
-
Open ashtray on center console and remove trim - arrows -.
-
Release 4 retainers - arrows - and lift off cover - 1 - including guide.
-
Disconnect electrical connector from side of guide.
Installing
Installation is performed in reverse sequence. Note the following:
-
Install selector lever handle.
