A4 Quattro Wagon V6-3.2L (BKH) (2005)
Vehicles with 4.2 ltr. MPI engine:
Note:
^
To prevent damage, the flexible couplings in the front exhaust pipes must not be bent further than 10°.
-
Disconnect exhaust system at clamps - arrows -.
-
Disengage rear section of exhaust system at rubber mountings and remove.
Note:
^
A second technician is required for removing the rear section of the exhaust system.
-
Disconnect exhaust system at clamp - arrow -.
-
Remove heat shield - A - for driveshaft - arrows -
-
Remove heat shield - 1 - for exhaust system below selector mechanism - arrows -.
-
Remove bolts at transmission/driveshaft flange.
-
Push driveshaft - 2 - together toward rear final drive. The constant velocity joints can be moved axially.