A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-2922003.png)
-
Remove circlip.
1 - Pliers (commercial type)
-
Press triple roller star off drive axle.
Assembly tool T10065/4 must not make contact with joint rollers.
-
Remove CV boot.
-
Remove grease from shaft splines.
-
Check rollers and raceways for wear.
-
Clean shaft and housing.
Triple roller joint AAR 2600 i or 3300 i, assembling
Assembly
-
Push new joint boot onto drive axle.
-
Press circlip - 1 - up to center of splines.
