Audi Workshop Service and Repair Manuals

Front Door Window Regulator: Service and Repair
Window Regulator and Door Window

Door Window, Removing From Window Regulator

1

-

Window frame

-

Removing:
-

Remove door trim.

-

Window frame with window regulator removed from front door.

-

Door window - 4 - removed.

-

To remove, unscrew countersunk screws - 3 - and remove window regulator from window frame.

-

Installation:
-

When installing, make sure that both guide rails, - arrows A -, run parallel to guide - arrow B -.

-

Tighten bolts - 3 - to 6 Nm.

2

-

Window regulator
-

Window frame with window regulator removed from front door.

-

Door window removed.

-

To remove, unscrew countersunk screws - 3 - and remove window regulator from window frame.

3

-

Countersunk screw
-

6 Nm

4

-

Window

-

Removing:
-

Drive down door window fully.

-

Unscrew bolts - 5 - and remove door windows from window regulator.

-

Installing:
-

Insert window into window regulator.

-

Screw bolts - 5 - into window regulator, but do not tighten yet.

-

Drive door window upward into window frame.