A4 Sedan L4-1.8L Turbo (AEB) (1997)
/Page-1282003.png)
-
Remove hose from turbocharger at air guide tube in lock carrier (arrow).
-
Remove both nuts -1- from lower engine mount.
-
Remove engine covers.
-
Set 10-222A engine support bridge on fender mounting edges.
-
Remove mounting eye from 2024A engine sling.
-
Insert bolt -1- in center bore of 2024A engine sling and secure using cotter pin.
-
Attach 2024A engine sling bolt to 10-222A engine support bridge spindle.
-
Attach 2024A engine sling to mounting eyes at front and rear of engine.
WARNING! Mounting hooks and pins on the engine sling must be secured with the positioning lock (arrows).
-
Using 10-222A engine support bridge spindle, lift up engine as far as possible.
Note: Lift engine only as far as possible without over-stretching or damaging any pipes or coolant hoses. Check for clearance of viscous fan; if
necessary remove.
