A4 Sedan L4-1.8L Turbo (AEB) (1997)
/Page-1464005.png)
^
Verify correct position of both camshafts.
-
Both camshaft markings must align with arrows on bearing caps (arrows).
-
The distance between the two arrows/paint markings is equivalent to 16 drive chain rollers.
-
The notch on exhaust camshaft is slightly offset inward toward drive chain roller -1-.
^
Remove 3366 bracket-tensioner.
^
Lightly coat hatched surface of double bearing cap with sealant D 454 300 A2 and install bearing cap (pay attention to alignment bushings).
CAUTION! Part numbers are listed here for reference only. Always check with your Parts department for the latest information.
^
Install remaining bearing caps (pay attention to alignment bushings).
^
Replace oil seals for intake and exhaust camshafts.
