audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Secondary Air Injection Pump Relay <--> [Air Injection Pump Relay]|Locations|Page 7987 > < Secondary Air Injection Pump Relay <--> [Air Injection Pump Relay]|Locations|Page 7985
Page 4
background image

^

Check fuse S234 (in fuse holder, position 34).

^

Check wire connection from Secondary Air Injection (AIR) pump relay -J299- (in 3-socket relay carrier in E-box, plenum chamber) via fuse S234
(in fuse holder, position 34) to Fuel Pump (FP) relay for open circuit:
Refer to Electrical Wiring Diagrams, Troubleshooting & Component Locations

Checking activation of the Secondary Air Injection (AIR) pump relay 
^

Switch ignition off.

^

Remove Secondary Air Injection (AIR) pump relay.

^

Connect VAG1527B voltage tester as follows:

^

Initiate output Diagnostic Test Mode (DTM) and activate Secondary Air Injection (AIR) pump relay -J299-.
-

LED must blink.

If LED does not blink:
^

Switch ignition off.

^

Connect VAG1598/31 test box at wiring harness to ECK do not connect ECM.

Secondary Air Injection Pump Relay <--> [Air Injection Pump Relay]|Locations|Page 7987 > < Secondary Air Injection Pump Relay <--> [Air Injection Pump Relay]|Locations|Page 7985