audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Customer Interest for Axle Pivot Bushing:|429802|Page 9734 > < Checking Ends of the Diaphragm Spring|Page 9727
Page 1
background image

Axle Pivot Bushing: Customer Interest
Rear Axle - Knocking/Creaking Noise

Group: 42

Number: 98-02

Date: June 24, 1998

Subject: 
Knocking/Creaking Noises From Rear Axle

Model(s): 
A4 Front Wheel Drive

1997 --> 1998 
see VIN 

Condition

Knocking/creaking noise from rear axle area. May be caused by poor fit of the rear axle bushing -A- to the rear axle.

Production

Bushings with optimized diameter installed as of VIN 8D_WA089000.

Note:

Only bushings installed in production are affected. All bushings in parts system are OK.

Service

To determine which bushing is affected: 

-

Lift vehicle on hoist.

-

Using a large pair of channel locks, attempt to turn bushings on both sides of axle.

If bushing(s) can be turned:

-

Install new bushing(s) Part No: 8D0 501 541D, see Repair Manual, Suspension, Wheels, Brakes, Steering, Repair Group 42.

Note:

DO NOT replace rear axle for this condition.

CAUTION!

Part numbers are for reference only. Always check with your Parts Dept. for the latest parts information.

When procedure applies to vehicles within the New Vehicle Limited Warranty, use the following:

Part Identifier: 4208

Customer Interest for Axle Pivot Bushing:|429802|Page 9734 > < Checking Ends of the Diaphragm Spring|Page 9727