A4 Sedan L4-1.8L Turbo (AEB) (1997)
-
Cut first section.
-
Move winding device as shown and attach relay pulley in lower window radius.
-
Route cutting cord as shown.
-
Cut adhesive up to point where cord no longer runs in relay pulley.
-
Remove relay pulley and continue to cut adhesive.
-
Move winding device as shown and attach relay pulley in upper corner of windshield.
-
Route cutting cord as shown.
-
Cut adhesive up to point where cord no longer runs in relay pulley.
-
Insert protective foil 1474/12 between molded headliner and rear window.