A4 Sedan L4-1.8L Turbo (AWM) (2001)
Front Door Exterior Handle: Service and Repair
Door Handle, Removing
Door Handle, Removing
1
-
Mount for door handle
-
The lock cylinder is part of the mount and cannot be individually replaced
2
-
Securing pins
-
When installing, be sure securing spring reaches completely around hinge arm
3
-
Hinge arm
4
-
Door handle
-
Before removing, door trim and door component carrier must be removed
-
To remove, remove locating pin - 2 - and flip up hinge arm - 3 -
-
Disengage catch at mount for door handle - 1 - using a screw driver Fig. 1.
-
Remove mount for door handle and lock cylinder together with door handle
Fig. 1 Disengaging mount for door handle
-
Using a small screwdriver, disengage retainer for slide (arrow - A -) by lifting lightly.
-
Disengage slide - 1 - in direction of arrow - C - by pressing a screwdriver in direction of arrow - B -.