A4 Sedan L4-1.8L Turbo (AWM) (2001)
-
Height adjuster must audibly engage into all five of the possible positions (even in the top position).
-
Switch must return by itself to released position after being actuated.
2
-
Anti-twist stop
3
-
Belt guide
4
-
Lower B-pillar trim
Removing:
-
Remove upper B-pillar trim - 1 - (do not detach three-point seat belt).
-
Push back retaining tabs (2x) for B-pillar trim at door sill.
-
Remove trim - 4 - upward and detach from belt guide - 3 -.
Installing:
-
Installation is the reverse of removal
5
-
Seat belt height adjuster trim
Fig. 1 Installing upper B-pillar trim in belt height adjuster