audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Camshaft Adjustment Solenoid Valves, Checking|Page 3085 > < Camshaft Adjustment Solenoid Valves, Checking
Page 2
background image

Display
^

This valve is actuated (clicks) for approximately one minute if the operation is not switched to the next component by pressing the " key.

If the valve is not actuated (does not click).
^

Check internal resistance of solenoid valve for camshaft adjuster.

Checking internal resistance 
^

Switch ignition off.

^

Disconnect connector -arrow- from camshaft adjuster.

^

Connect multimeter to valve to measure resistance.
Specified value: 10 to 18 Ohms

If specified value is not attained:
^

Replace solenoid valve for camshaft adjuster.

If specified value is attained:
^

Check power supply.

Checking power supply 
Test requirements: 
^

Fuse for solenoid valve for camshaft adjustment OK
Refer to,Electrical Wiring Diagrams.

^

Fuel pump relay OK

Camshaft Adjustment Solenoid Valves, Checking|Page 3085 > < Camshaft Adjustment Solenoid Valves, Checking