audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Compression Check|Specifications|Page 3938 > < Compression Check|Specifications|Page 3936
Page 2
background image

^

Disconnect connectors -3-.

^

Remove ignition coils -1-.

^

Remove spark plugs with spark plug spanner 3122B.

^

Disconnect connectors from all injectors.

^

Fully open throttle valve.

^

Check compression with compression tester VAG 1381N.A.G 1763.

Note:  Using the compression tester

Refer to, Operating instructions

^

Operate starter until tester shows no further pressure increase.

Compression pressure values:
^

Install spark plugs and ignition coils.

Note:  Replace gaskets for ignition coils if damaged.

^

Check Diagnostic Trouble Code (DTC) memory:

Note:  DTC's will have been recorded in the DTC memory because the connectors have been unplugged. Check and, if necessary, erase the DTC
memory after completing the test.

Compression Check|Specifications|Page 3938 > < Compression Check|Specifications|Page 3936