audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Throttle Cable/Linkage|Service and Repair > < Throttle Cable/Linkage|Service Precautions|Page 7510
Page 2
background image

-

Connect multimeter between kick-down switch terminals using jumper wires from VW 1594 adaptor kit.

-

Measure resistance across switch.
-

Specified Value: Infinity Ohms.

-

Slowly depress accelerator pedal until Wide Open Throttle is reached. If properly adjusted, following conditions will be met:
-

Shortly after kick-down point, resistance must drop to 0 Ohms

-

Accelerator pedal must almost be up to the full travel stop

Throttle Cable/Linkage|Service and Repair > < Throttle Cable/Linkage|Service Precautions|Page 7510