A4 Sedan L4-1.8L Turbo (AWM) (2001)
Display Group 066
-
Press "08 - erase DTC memory" to end function <- button.
If indications do not resemble description:
Check switch
-
Remove driver-side storage compartment.
-
Disconnect harness connector at Clutch Pedal Position (CPP) switch.
-
Connect multimeter between terminal 1 and 2 for resistance measurement.
-
Specification: approx. 0 ohms
-
Depress clutch pedal.
-
Specification: infinity ohms (no continuity)
If specified value is not obtained:
-
Replace Clutch Pedal Position (CPP) switch.
If specified value is obtained:
-
Check voltage supply
Checking voltage supply