A4 Sedan L4-1.8L Turbo (AWM) (2001)
-
Shift selector lever into position "2".
-
Shift lock solenoid together with locking latch must be slid into the shift mechanism housing from the top.
-
Carefully drive in pin for locking latch.
-
Using a screwdriver, mechanically check for engagement of the locking latch in position "P" and "N" of selector lever.
-
Lay cable lever into shift mechanism housing and engage it noticeably in both bearing areas.
-
Check locking function of locking lever. In selector lever position "P", it must engage in the catch and lock the shift mechanism.
-
Set frame onto shift mechanism housing (ribbing points upward) and insert buffer stop into cable lever.
-
Install shift mechanism.