A4 Sedan L4-2.0L Turbo (BPG) (2005)
Vacuum Pump: Service and Repair
Brake System Vacuum Pump V192, Removing and Installing
Brake system vacuum pump V192, removing and installing
The vacuum pump is not intended to be serviced. If problems occur, trace the malfunction by means of a function test and/or pressurized leak test. If a
malfunction is found, the brake system vacuum pump V192 must be replaced.
Removing:
-
Remove trim cover.
-
Disconnect electrical connector - 2 -.
-
Disconnect vacuum hose - 1 - from vacuum pump.
-
Press clip out of bracket by hand.
-
Lift out brake system vacuum pump V192.
Installing
Installation is carried out in reverse sequence.