A4 Sedan L4-2.0L Turbo (BPG) (2005)
/Page-1404006.png)
-
Remove bolts - arrows - for transmission/oil pan.
-
Remove M10 bolts - arrows -.
-
Loosen bolts - 1 to 18 - in a diagonal sequence.
-
Remove oil pan, and if necessary loosen by applying light strikes with a rubber hammer.
Installing
Installation is in reverse order of removal. Note the following:
Note:
^
Replace seal.
^
Secure all hose connections using hose clamps appropriate for the model type.
^
During installation, all cable ties must be re-installed at the same location.
-
Remove residual sealant from oil pan and at cylinder block, e.g. using a rotating plastic brush.
CAUTION: Wear safety glasses.
-
Clean sealing surfaces, they must be free of oil and grease.
