audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Delivery Rate of Fuel Pump, Checking|Page 4075 > < Delivery Rate of Fuel Pump, Checking|Page 4073
Page 3
background image

-

Connect remote control V.A.G 1348/3 A with connection V.A.G 1348/3-3 to contact - 1 - using an adapter cable from the connector test set V.A.G
1594 C .

-

Using insulating tape, tape over the second contact of adapter cable V.A.G 1348/3-3 to prevent a short circuit - arrow - .

-

Connect contact - 4 - to vehicle Ground (GND) using a jumper cable from connector test set V.A.G 1594 C .

-

Connect alligator clip to vehicle battery (positive).

-

Remove fuel filler cap from fuel filler tube.

-

Remove engine cover - arrows - .

CAUTION:  Fuel system is under pressure. Before opening system, place clean rags around the connection. Then release pressure by
carefully loosening the connection.

-

Disconnect fuel supply line - arrow - .

Delivery Rate of Fuel Pump, Checking|Page 4075 > < Delivery Rate of Fuel Pump, Checking|Page 4073