A4 Sedan L4-2.0L Turbo (BPG) (2005)
Installing
Installation is in reverse order of removal. Note the following:
-
Fasten mounting straps and carrier plate - 1 through 10 -.
-
Fasten fuel filler tube with Ground (GND) connection using bolt -1-.
CAUTION: After installing, check electrical connection of metal ring at fuel filler tube to a blank portion of chassis using Ohm meter:
Specification: approx. 0 Ohm.
NOTE: Ignore - Pos. 2 -.
-
Install right rear wheel housing liner Body Exterior -.
-
Install rear seat bench Body Interior -.
-
Connect battery. Observe safety precautions after connecting battery.
Torque specifications
Component
Nm
Mounting straps and carrier
plate for fuel tank to body
23
Fuel filler tube to wheel housing
23
Fuel Pump (FP) Control Module J538 to body 2.5