A4 Sedan L4-2.0L Turbo (BPG) (2005)
Turbo Boost Sensor: Service and Repair
Charge Air Pressure Sensor G31, Removing And Installing
Removing
-
Disconnect electrical harness connector - 2 - at Charge Air Pressure Sensor G31.
-
Remove bolts and pull out Charge Air Pressure Sensor G31 from charge air cooler.
NOTE: Ignore - 1 -.
Installing
Installation is in reverse order of removal, note the following:
NOTE: Replace O-ring.
Torque specifications
Charge Air Pressure Sensor G31 to charge air cooler
5 Nm