A4 Sedan L4-2.0L Turbo (BPG) (2005)
/Page-2500001.png)
Wastegate Actuator: Testing and Inspection
Wastegate Bypass Regulator Valve -N75-, Checking
Wastegate Bypass Regulator Valve N75, Checking
Special tools, testers and auxiliary items required
-
Multimeter V.A.G 1526 or equivalent.
-
Test Box 105 Pin VAG1598/42.
-
Adapter Lead Vag1598/39 VAG1598/39.
-
Adapter cable V.A.G 1598/39-1.
Test requirements
-
Fuses for the Engine Control Module (ECM) J623 OK.
-
Battery voltage at least 12.5 volts.
-
All electrical consumers such as, lights and rear window defroster, switched off.
-
On vehicles with automatic transmission, selector lever in position "P" or "N".
-
A/C switched off.
-
Ground (GND) connections between engine/transmission/chassis OK.
-
Ignition switched off.
Test sequence
-
Remove engine cover - arrows -.
-
Disconnect electrical harness connector - 2 - at Wastegate Bypass Regulator Valve N75.
-
Using the Multimeter V.A.G 1526 A or equivalent, check the Wastegate Bypass Regulator Valve N75 for resistance.
