audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Engine Controls - Long or Extended Crank At Cold Start|Page 7585 > < Engine Controls - Long or Extended Crank At Cold Start|Page 7583
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Shudder When Coming To A Stop

24 Vehicle shudders when coming to a stop

24 10 07 

2015004/3 

March 16, 2010. 

Supersedes Technical Service Bulletin Group 01 number 08-15 dated November 24, 2008 for reasons listed below.

Affected Vehicles

Condition

On vehicles with 2.0 TFSI engine and Multitronic (CVT) transmission, the customer complains of a light shudder that lasts about 1 second while coming
to a stop under light braking at around 25 mph.

Technical Background

The cause of this condition is the software calibration of the Engine Control Module (ECM).

Production Solution

Improved software for the ECM.

Service

Perform the ECM software update in TSB 2017905 01 MIL on (DTC P0601 stored in ECM).

Engine Controls - Long or Extended Crank At Cold Start|Page 7585 > < Engine Controls - Long or Extended Crank At Cold Start|Page 7583